Mounting, Rack mounting, Mounting 3-3 – Alcatel-Lucent OMNISTACK 6300-24 User Manual
Page 31: 3 mounting
3-3
Mounting
3
Mounting
A switch unit can be mounted in a standard 19-inch equipment rack or on a desktop
or shelf. Mounting instructions for each type of site follow.
Rack Mounting
Before rack mounting the switch, pay particular attention to the following factors:
• Temperature: Since the temperature within a rack assembly may be higher than
the ambient room temperature, check that the rack-environment temperature is
within the specified operating temperature range. (See page C-1.)
• Mechanical Loading: Do not place any equipment on top of a rack-mounted unit.
• Circuit Overloading: Be sure that the supply circuit to the rack assembly is not
overloaded.
• Grounding: Rack-mounted equipment should be properly grounded. Particular
attention should be given to supply connections other than direct connections to
the mains.
To rack-mount devices:
1.
Attach the brackets to the device using the screws provided in the Bracket
Mounting Kit.
Figure 3-2. Attaching the Brackets
Console
1
3
5
7
9
11
13
15
17
19
21
23
1000=Green
10/100=Y
ellow
Power
BPS
Diag
2
4
6
8
10
12
14
16
18
20
22
24
Link/
Act
FDX
Link/
Act
FDX
6300-24
OmniS
tack