Aiwa AZ-RS1 - Manual (Page 18)

18
To preset a station manually
(Manual preset)
If there is a station that cannot be preset
automatically, you can preset it manually by
the following procedure.
Before starting, you must exit the auto preset
mode (“
” and the preset numbers
should not be displayed).
1 Press TUNER repeatedly to select “FM
1” or “FM 2.”
2 Tune in the station you want to preset.
3 Press and hold PRESET for more than 2
seconds.
“
” and the preset numbers flash in
the display.
4 Within 10 seconds, press . or >
repeatedly to select the preset number
you want to store the station on.
The selected preset number starts
flashing.
5 Within 10 seconds, press PRESET.
To tune in a preset station
1
Press TUNER repeatedly to select
“FM 1” or “FM 2.”
2
Press PRESET to display the
preset numbers.
3
Press . or > repeatedly to
select the preset number of the
station you want to tune in.
To clear all preset stations
Turn off the power, remove the “pavit” from
the player, and press and hold Nx/POWER
for more than 10 seconds.
The preset stations return to those at the time
of purchase.