Apple Color OneScanner 600/27 - Manual (Page 146)

Set up the scanner first: Before you connect the Transparent Media Adapter to
your scanner, you need to set up the Apple Color OneScanner and install the
scanner software. See Chapters 2 and 3 for instructions if you haven’t yet set
up the scanner hardware and software.
To connect the adapter:
1 Switch off the scanner and then switch off your Macintosh computer.
Devices connected through SCSI cables require a certain power-on and
power-off sequence. See “Switching the Power On,” in Chapter 2, for more
information.
2 Grip the scanner top cover on both sides and lift it off.
Put the original cover away in a safe place for future use. The adapter replaces
the cover.
Grasp cover here.
Power switch.
“O” is off and
“I” is on.
138 Chapter 10