AT&T E2520 - Manual (Page 17)

15
Telephone Operation
15
Handset clock settings
To set time
Follow steps at left to set the handset clock time. Use
the keypad to enter four digits (i.e., 09:15), then press
AM/PM
to toggle the display between AM and PM.
When the correct time is displayed, press
SAVE
.
NOTE: You can choose to set the time manually, or
you can allow it to be set automatically with incoming
Caller ID information. The time will be set automatically
only if you subscribe to Caller ID service provided by
your local telephone company (see page 5).
To turn clock on or off
The handset time display is optional. To turn it on or
off, select
MENU
, press V until
CLOCK MODE
is
highlighted, then press
OK
.
Press
ON
or
OFF
buttons to enable or disable the clock
display, then press
OK
.
HANDSET 1
SET TIME
HANDSET SETTINGS
CLOCK MODE
REGISTER
SET TIME
12:00 AM
Select MENU.
Select SET TIME.
Enter time, press AM/PM, then SAVE.
To turn clock on or off.
CLOCK ENABLE
ON
REDIAL MEM MENU
OFF ON OK
^ V OK
< AM/PM SAVE
91-000020-021-000-E2520 Manual-ENG.qxd 2/13/1950 7:21 PM Page 15