AT&T E2520 - Manual (Page 18)

16
Telephone Operation
CLOCK MODE
CALLS LOG
SET TIME
HANDSET SETTINGS
HANDSET 1
Base settings from handset
Base Settings Menu in Handset
This menu allows the user to set Tone/Pulse and Ringer
Melody on the base by handset.
Tone/Pulse
You can choose Tone or Pulse dialing for the base and
all registered handsets. The factory default setting is
TONE. Change this to PULSE only if you do not have
touch-tone dialing service.
At the handset: Follow the steps at the left to use hand-
sets to select between Tone or Pulse.
At the base: Press * button three times to enter pro-
gramming mode. You will hear a happy tone. The IN
USE and SPARE BATTERY lights will flash. Press 0
to select between Tone or Pulse. If you select Tone,
the IN USE light will turn on. If you select Pulse, the IN
USE light will turn off. Press # to confirm your selec-
tion.
OK V ^
MENU MEM REDIAL
CLOCK MODE
BASE SETTINGS
SET TIME
REGISTER
OK V ^
RINGER MELODY
TONE/PULSE
OK V ^
PULSE
TONE
OK V ^
TONE
PULSE
OK V ^
91-000020-021-000-E2520 Manual-ENG.qxd 2/13/1950 7:21 PM Page 16