Sony RHCIL - Manual (Page 5)

5
Connecting the Unit to the Power Outlet
Connect the power cord to the AC adaptor. Next, connect the DC cable of the AC adaptor
to the DC connector of the unit. Finally, connect the power cord to the power outlet.
Make sure that the power outlet is close to the unit and readily accessible.
Notes
• The shape of the power cord varies depending on the country or region of purchase.
• When using the drive with the 6-pin to 4-pin IEEE 1394 cable, you must connect the AC adaptor and
power cord to the unit. This is not necessary when using a 6-pin to 6-pin IEEE 1394 cable.
Connecting the Unit to your Computer
Connect the IEEE 1394 cable to the unit. Then, connect the cable to a IEEE 1394 port of
your computer.
Note
A default device driver is installed the first time you use the unit.
AC adaptor
DC connector
To AC outlet
To your
computer
IEEE 1394 cable
IEEE 1394 port