Sony SCD-X501ES - Manual (Page 7)

Ge
tting Star
te
d
7 GB
Connect the Super Audio CD player to an audio
component. Be sure to turn off the power of all
components before making connections and
connect securely to prevent noise.
Connecting a stereo amplifier
or MD deck
When you connect a stereo amplifier or make an
analog connection with an MD deck, connect the
player and the component through the
ANALOG 2CH OUT L/R jacks.
Use the supplied audio connecting cord for this
connection. Be sure to match the color-coded
pin to the appropriate jacks: white (left) to white
and red (right) to red.
Audio connecting cord (supplied)
Note
When playing a Super Audio CD with a multi-channel
area (page 5), the ANALOG 2CH OUT jacks output
multi-channel FRONT L/R signals only. In this case,
the vocals or other sounds may not be heard, depending
on the disc.
Connecting a multi-channel
amplifier
When you have an amplifier equipped with the
5.1CH input jacks (multi-channel amplifier, AV
amplifier, etc.) and connect the player and the
amplifier through the ANALOG 5.1CH OUT
jacks (FRONT L/R, SURROUND L/R,
CENTER, SUB WOOFER), you can play a
Multi-channel Super Audio CD and enjoy the
multi-channel playback.
Use audio connecting cords (supplied*) for this
connection. For FRONT L/R or SURROUND
L/R connection, use the connecting cords (Red
and White jacks) and be sure to match the color-
coded pin to the appropriate jacks: white (left) to
white and red (right) to red. For CENTER and
SUB WOOFER connection, use the connecting
cords (Black).
FRONT L/R or SURROUND L/R
connection
Audio connecting cords (supplied*)
* If you use the supplied audio connecting cord for
ANALOG 2CH connection, you will need another
audio connecting cord (not supplied) for ANALOG
5.1CH connection.
CENTER or SUB WOOFER
connection
Audio connecting cords (supplied)
Hooking Up the Audio
Components
White (L)
Red (R)
To CD (Super Audio CD) or line input jacks
(L/R) on a stereo amplifier, MD deck, etc.
White (L)
Red (R)
Black
continued