Adding a tag to the system, Removing a tag from the system – AMX Control System Accessories Anterus User Manual
Page 25
Anterus Configuration Manager
21
Anterus RFID Solution
Adding a Tag to the System
1.
Click the Add Tag button in the bottom-left corner of the Global Register page (FIG. 21) to add a
new RFID Tag to the system.
This invokes a set of fields for the new Tag at the bottom of the page (FIG. 22):
2.
Enter a Tag ID.
3.
Enter a Tag Name.
4.
Enter Tag Info.
5.
Enter the desired Acquired Threshold value for the new tag.
6.
Click on the Accept button to enter the newly defined tag into the Anterus system.
Removing a Tag from the System
In either the Global Register Page or the Reader Configuration Page (see below), click on the Delete
icon for any Tag (see FIG. 23 on page 22). Once deleted, the Tag is permanently removed from the
system.
FIG. 21
Add Tag button
FIG. 22
New tag fields
Click to add a new Tag
Tag ID
Name
Info
Acquired Threshold