Sony DSX-A30 - Manual (Page 15)

15
Adjusting setup items
1
Press and hold the select button.
The setup display appears.
2
Rotate the control dial until the desired
item appears, then press it.
3
Rotate the control dial to select the
setting, then press it
*.
The setting is complete.
4
Press (BACK).
* For CLOCK-ADJ, TUNER-STP and BTM
settings, step 4 is not necessary.
The following items can be set depending
on the source and setting:
*1 This feature is available on non-Argentine
models.
*2 When the unit is turned off.
CLOCK-ADJ (Clock Adjust) (page 4)
TUNER-STP * 1 * 2 (Tuner Step) (page 4)
CT (Clock Time)
Activates the CT function: “ON,” “OFF”
(page 10).
BEEP
Activates the beep sound: “ON,” “OFF.”
CAUT ALM * 2 (Caution Alarm)
Activates the caution alarm: “ON,”
“OFF” (page 5).
AUX-A * 2 (AUX Audio)
Activates the AUX source display: “ON,”
“OFF” (page 16).
AUTO OFF
Shuts off automatically after a desired
time when the unit is turned off: “NO,”
“30S (Seconds),” “30M (Minutes),” “60M
(Minutes).”
BLK OUT (Black Out)
Turns off the illumination automatically
for any source (e.g., during radio
reception, etc.) if no operation is
performed for 5 seconds: “ON,” “OFF.”
To bring the light back on, press any
button on the unit. (When activated,
remote operation is unavailable.)
DEMO (Demonstration)
Activates the demonstration: “ON,”
“OFF.”
DIMMER
Changes the display brightness: “ON,”
“OFF.”
AUTO SCR (Auto Scroll)
Scrolls long items automatically: “ON,”
“OFF.”
REPEAT (page 12)
LOUDNESS
Reinforces bass and treble for clear
sound at low volume levels: “ON,”
“OFF.”
BTM (page 9)