Computer, When you use a ps/2 mouse port – Sony VPL-PS10 User Manual
Page 20
20
(GB)
Connecting to a VCR or 15k RGB/
Component Equipment
This section describes how to connect the projector to
a VCR or 15k RGB/component equipment.
For more information, refer to the instruction manuals
of the equipment you are connecting.
To connect a VCR
MOUSE
CTRL S
PLUG IN POWER
AUDIO
AUDIO
VIDEO S VIDEO
INPUT A
~AC IN
S-Video
cable (not
supplied)
Left side
to audio
output
Video
cable (not
supplied)
VCR
to S video
output
to video
output
.........................................................................................................................................................................................................
1) Macintosh is a registered trademark of Apple Computer, Inc.
Connecting the Projector
When you use a PS/2 mouse port
MOUSE
CTRL S
PLUG IN POWER
AUDIO
AUDIO
VIDEO S VIDEO
INPUT A
~AC IN
Stereo
audio
connecting
cable (not
supplied)
Left side
HD D-sub 15-pin
cable (supplied)
PS/2
Mouse
cable
(supplied)
to monitor
output
to mouse
port (PS/2)
to audio
output
To connect a Macintosh
1)
computer
Use an ADP-20 signal adapter (not supplied). In this
case, however, you cannot control the mouse of the
computer using the Remote Commander.
Computer
Stereo
audio
connecting
cable (not
supplied)