Sony VPL-PS10 - Manual (Page 23)

23
(GB)
.........................................................................................................................................................................................................
1) PowerPoint is a registered trademark of Microsoft Corporation (U.S.A. and other countries).
INPUT B PC CARD
INPUT A ~AC IN
PUSH
Computer
Left side of the projector
to router
LAN cable
Hub
Computer
Computer
LAN cable
LAN cable
LAN cable
Connecting using the ETHER connector
Installing a memory card
If you store a file created with Microsoft PowerPoint 1)
in a memory card and insert it into the INPUT B PC
CARD slot, you can run a presentation without
connecting a computer.
For inserting and removing a memory card, see “Installing
a PC card” on page 21 (GB).
For details on the recommended memory card, see the
supplied “Specified/recommended PC Card/Wireless LAN
Access Point.”
to INPUT B
EHTER connector
Connecting the Projector / Selecting the Menu Language
Selecting the Menu
Language
You can select the language to be used in the menu
and other on screen displays from 9 languages. The
factory setting is ENGLISH.
1
Plug the AC power cord into the wall outlet.
2
Press the I / 1 key to turn on the power.
3
Press the MENU key.
The menu display appears.
4
Press the M or m key to select the SET SETTING
menu, then press the , or ENTER key.
The SET SETTING menu appears.
HELP
LAMP/
COVER
TEMP/
FAN
POWER
SAVING
ON/
STANDBY
RESET APA
VOLUME
ENTER
INPUT
MENU
1
4,5,6 3 2
SET SETTING
STATUS: ON
INPUT-A: COMPUTER
AUTO INPUT SEL: OFF
LANGUAGE: ENGLISH
POWER SAVING: OFF
IR RECEIVER: FRONT&REAR
INPUT-A
ENTER key