Audiovox FPE3000 - Manual (Page 21)

Turning On
Turning Off
Selecting input signal
Turning On/Off / Selecting input signal
1. Connect the power, the red indicator lights up, the set is
in STANDBY mode.
2. Press the POWER button on the unit's control panel or
the button on the remote control to turn the set on.
With the power on, press the POWER button to turn off the
set, and the set is in standby mode.
* Always unplug the AC adapter from the product and power
outlet when not using for a long period of time.
1. Press the button on the remote control or SOURCE
button on the set's panel to select input mode. You can
select TV, AV, S-video, YCbCr, YPbPr or PC.
2. If you want to go to TV mode, press button repeatedly
to select TV mode.
3. Press DSP button, the screen display current mode.
Press ENTER to cancel OSD.
Notes:
This TV set can automatically turn off by:
1. When there is no TV signal input for about 15 minutes;
2. Sleep timer.
TV
21