Audiovox FPE3000 - Manual (Page 24)

Picture adjustment
Adjusting picture
Using STILL button
Using AUTO.ADJ button
1. Press MENU button to display PICTURE SETTING menu.
2.Press CH5/6 button to select item.
You can still current screen picture by pressing STILL button on
the remote.
Press AUTO.ADJ button on the remote to adjust picture for best
viewing.
Item VOL- VOL+
Contrast weaker stronger
Color paler deeper
Brightness darker lighter
Sharpness softer sharper
Tint purplish greenish
The adjusted settings are stored in the User mode.
There are three preset picture modes and one User-set picture
mode. Press the P.M button to select a picture mode according to
your favorites.
You can quickly select picture mode by P.M button. There are
four picture mode: Bright, Standard, Mild and User mode.
4. Press P.M button to select picture mode.
PICTURE SETTING
Brightness
Contrast
Color
Sharpness
Tint
50
50
50
50
50
<LEFT> or <RIGHT> key to change
Bright: Select for a bright picture.
Standard: Select for a normal picture.
Mild: Select for a fine/soft picture.
Adjusted settings are stored in User mode.
24
* To exit the menu, press
ENTER button.