Self-timer, Cyber-shot user guide – Sony DSC-HX50V User Manual

Page 106

Advertising
background image

Cyber-shot User Guide

Print

Search

Before Use

Operating the camera

Shooting

Viewing

Useful shooting functions

Useful viewing functions

Changing settings

Viewing images on a TV

Using with your computer

Printing

Troubleshooting

Precautions / About this camera

Contents list

Top page > Useful shooting functions > Menu items available for shooting > Self-Timer

Self-Timer

Automatic shooting with Self-portrait timer

1.

Press /

(Cont. Shooting/Self-Timer) on the control wheel.

2.

Select the desired mode with the control wheel.

(Single Shooting)

Does not use the self-timer.

(10sec)

Sets the self-timer to a 10-second delay.

When you press the shutter button, the self-timer lamp flashes and a

beep sounds until the shutter operates.
To cancel, press /

again.

(2sec)

Sets the self-timer to a 2-second delay.

(Self-portrait One

Person)

Sets the self-timer to Self-portrait timer.

When the camera detects the specified number of faces, a beep

sounds, and the shutter operates 2 seconds later.

(Self-portrait Two

People)

(Self-Timer:

Continuous Shooting)

The camera shoots 10 continuous frames 10 seconds later after you

press the shutter button.

(Self-Timer

(Bracket))

The camera starts bracket shooting 10 seconds later after you press the

shutter button.

Tips for preventing blur

If your hands or body moves while holding the camera and pressing the shutter button, “Camera
shake” occurs.
Camera shake occurs frequently under low-light or slow shutter speed conditions, such as those
encountered in

(Night Portrait) or (Night Scene) mode.

To reduce camera shake, set the self-timer to a 2-second delay and brace your arms against your
sides after pressing the shutter button.

Notes

[Flash] is set to [Off] in continuous or bracket shooting mode.
When [Continuous Shooting] is selected, [Focus], [White Balance], and [Exposure Compensation]
are adjusted for the first image, and these settings are also used for the other images.
When the internal memory or a memory card is full, the burst stops.
In continuous or bracket shooting mode, [VGA] image size will be set while recording on internal
memory.

99

Advertising