Gps setting (dsc-hx50v), Details, Cyber-shot user guide – Sony DSC-HX50V User Manual

Page 207

Advertising
background image

Cyber-shot User Guide

Print

Search

Before Use

Operating the camera

Shooting

Viewing

Useful shooting functions

Useful viewing functions

Changing settings

Viewing images on a TV

Using with your computer

Printing

Troubleshooting

Precautions / About this camera

Contents list

Top page > Changing settings > Main Settings > GPS setting (DSC-HX50V)

GPS setting (DSC-HX50V)

Checking triangulating status

The built-in GPS sensor of this camera acquire the information on location, and record it on images.
Using the software “PlayMemories Home,” you can import photos and movies recorded with location
information to a computer and enjoy viewing them with a map which shows their shooting location. See
“PlayMemories Home Help Guide” for details.

1.

MENU

(Settings)

(Main Settings)

[GPS setting]

desired mode

On GPS setting is activated.

Off GPS setting is inactivated.

Set this to not record location information.

To receive a GPS signal

Proper triangulation is not possible indoors or near tall buildings. Use your camera in an open area
outside, and turn on your camera again.
If no triangulation icon appears, even if you wait for several minutes, you may be in an area where
GPS signal reception is difficult or impossible. Begin shooting where you are, or move to an open
area outside. If you shoot where you are, no location information will be recorded.

Notes

During take off and landing of an airplane, set [Airplane Mode] to [On].
Use GPS in accordance with the regulations of the place or situation.
It may take from several tens of seconds to several minutes to acquire the location information
when you use the GPS for the first time or use it again after long intervals. Triangulating time can
be shortened by taking in GPS assist data.

[Details]

Do not cover the GPS sensor with your finger when searching for GPS satellites or when
triangulating. This decreases the sensitivity of the GPS sensor and triangulation may fail.

Checking triangulating status

The indicator changes according to the strength of GPS signal reception when GPS is activated. The
triangulating status can also be checked using [Position Information].

[Details]

Triangulating
status

GPS
indicators

GPS reception status

Off

No

indicator

[GPS setting] is set to [Off] or an error occurred.

200

Advertising