Sony PCG-C1X - Manual (Page 49)

Connecting Peripheral Devices 37
To remove the VGA adapter
Turn off your computer and then press both sides of the connector of the
VGA adapter.
To connect a projector
You can use a projector as an external display, such as the Sony LCD
Projector.
1 Use the symbol to locate the Monitor connector. Plug the RGB
signal cable to a VGA adapter and into this connector.
2
Use the symbol to locate the Headphone connector. Plug the audio
cable into this connector.
To select a display
When you connect an external display to the monitor connector, you can
press Fn+F7 to toggle the output between the Liquid Crystal Display
(LCD), the external monitor, or both devices. See “Selecting the Display
Mode” on page 52 for more information.
✍
See the manual that came with your projector for more information on installation and use.
Projector
Power cord
RGB signal cable
to
Monitor
Audio cable (sold separately)
VGA adapter (supplied)
Computer