Avaya DEFINITY 4606 - Manual (Page 59)

Resetting and Power Cycling the IP Telephone
Issue 1 July 2001 9-5
Power cycling the phone
Use the power cycle with your System Administrator’s approval only if the basic or
programmed reset procedure cannot be performed or does not correct the
problem:
1. Unplug the phone and plug it back in.
The phone connection is re-established.
2. If power-cycling does not correct the problem, your System Administrator
can perform a more severe power cycle routine by unplugging both the
phone and the Ethernet cables.
!
WARNING:
Because the type of power cycle mentioned in Step 2 involves
reprogramming certain values, it should only be performed by your
Telephone System Administrator.