Sony DSC-P150 - Manual (Page 88)

88
Viewing image files once
copied to a computer with
your camera
When an image file copied to a computer no
longer remains in a “Memory Stick,” you
can view that image again on your camera
by copying the image file in the computer to
a “Memory Stick.”
• Step 1 is not necessary when the file name set
with your camera has not been changed.
• You may be unable to play back some images
depending on the image size.
• When an image file has been processed by a
computer or when the image file was recorded
using a model other than your camera, playback
on your camera is not guaranteed.
• When the overwrite confirmation message
appears, enter a different number in step 1.
• When there is no folder, first create a folder
with your camera and then copy the image file
(page 46).
a Right-click the image file, then
click [Rename]. Change the file
name to “DSC0
ssss ”.
Enter a number from 0001 to 9999 for
ssss.
• An extension may be displayed depending on
the computer settings. The extension for still
images is JPG, and the extension for movies is
MPG. Do not change the extension.
b Copy the image file to the
“Memory Stick” folder.
1 Right-click the image file, then
click [Copy].
2 Select and double-click the [DCIM]
folder from [Removable Disk] or
[Sony MemoryStick] in [My
Computer].
3 Right-click the [sssMSDCF]
folder in the [DCIM] folder and
click [Paste]. sss stands for any
number within the range from 100
to 999.
Installing “Picture Package”
“Picture Package” is only for
Windows computers.
You can use the “Picture Package” software
on your Windows computer to compile the
images shot with your camera. When you
install “Picture Package,” the USB driver is
also installed at the same time.
• When the computer is in use, shut down all
application software before you install “Picture
Package.”
For computer environment
See page 81 for the basic Windows
operating environment. Other system
requirements are as follows.
Software: Macromedia Flash Player 6.0 or
later, Windows Media Player 7.0 or later,
DirectX 9.0b or later
Sound card: 16-bit stereo sound card with
speakers
Memory: 64 MB or more (128 MB or
more is recommended.)
Hard Disk: Disk space required for
installation: approximately 200 MB
Display: Video card (Direct Draw driver
compliant) with 4 MB of VRAM