Sony Bluetooth Utility User Manual
Page 390
has been set to "Off", a connection will not automatically be established with the modem.
Please connect to the modem manually.
When you place a call using a company switchboard or other exchange, the system may require you to enter a "0" before the telephone
number itself. Please check the type of telephone line you are using.
The fax service may not have been enabled for sending (or receiving).
Please check the settings by following the procedure below.
1.
Open [Printers and Faxes] from the Control Panel, right-click on the [Fax] icon, and then click on [Properties]
The [Fax properties] window will appear.
2.
Select the [Device] tab, right-click on the modem you wish to use, and then click on [Properties]
3.
Select the [Send] tab, and then confirm that "Enable device to send" has been checked.
Page 390