Sony Bluetooth Utility - Manual (Page 644)

(receiving) device. The content of the message will vary with the software that supports the Bluetooth TM wireless technology
function on the destination device, so please be sure to follow the instructions provided.
If you are using the Bluetooth
TM Utility, a message similar to the one below will appear.
If the file has been sent successfully, the message below will appear.
Please click on the [OK] button.
The message below will appear if the file transmission was unsuccessful.
Please click on the [OK] button to close the message, and repeat the procedure.
Note
o Files that have been sent will be saved in a file transfer shared folder on the destination device.
o Additionally, with "File transfer", you can open the shared folder on the destination device using Explorer, specify a subfolder,
and then send the file there.
o You can use Properties in the Bluetooth Information Exchanger to change the location of the "Shared folder" on the hard drive.
■Sending files to a PC or PDA (by right-clicking the mouse)
1. Turn on the PC or PDA
Confirm that a connection has been enabled before proceeding to the next step.
Page 644