Adjusting the speaker levels and, Balance (test tone), Adjusting the speaker levels and balance – Sony STR-KS2300 User Manual
Page 30: Test tone), A. cal menu parameters, When you have finished, X auto cal (auto calibration no/ yes), X cal load (calibration load), Press amp menu, Press or b to enter the menu
30
GB
When you have finished
Disconnect the optimizer microphone from the
receiver.
Note
If you have changed the position of the speakers, it
is recommended that you perform Auto Calibration
again in order to enjoy the surround sound.
You can use the A. CAL menu to make
settings for the Auto Calibration function to
suit your preference.
Select “8-A. CAL” in the amplifier menus. For
details on adjusting the parameters, see
“Navigating through menus” (page 35) and
“Overview of the menus” (page 36).
x AUTO CAL (Auto Calibration no/
yes)
• A.CAL NO
The Auto Calibration function is not
activated.
• A.CAL YES
The Auto Calibration function start.
x CAL LOAD (Calibration load)*
• LOAD YES
Select this when you want to load the saved
Auto Calibration result.
• LOAD NO
Select this when you do not want to load the
saved Auto Calibration result.
* You can select this parameter only when you have
performed the Auto Calibration and saved the
settings.
7: Adjusting the speaker
levels and balance
(TEST TONE)
You can adjust the speaker levels and balance
while listening to the test tone from your
listening position.
Tip
The receiver employs a test tone with a frequency
centered at 800 Hz.
1
Press AMP MENU.
“1-LEVEL” appears on the display.
2
Press
or
b to enter the
menu.
3
Press
V/v repeatedly to select
“T. TONE”.
4
Press
or
b to enter the
parameter.
A. CAL menu parameters
1
2
3
4
6
7
8
0/10
ENTER
9
2CH
A.F.D.
RETURN/EXIT
TV CH –
PRESET –
TV CH +
PRESET +
REPLAY ADVANCE
MOVIE
MUSIC
AMP MENU
CLEAR
DISPLAY
MUTING
TV VOL
MASTER VOL
DVD/BD
MENU
AUTO CAL
D.TUNING
D.SKIP
THEATRE
-
.
<
<
>
O
5
>10
MEMORY
MENU/HOME
TOOLS/
OPTIONS
1
2-5
MASTER
VOL +/–