Sony STR-KS2300 - Manual (Page 41)

41 GB
Ampl
ifier O
p
e
ration
s
Settings for the tuner
(TUNER menu)
You can use the TUNER menu to set the FM
station receiving mode.
Select “4-TUNER” in the amplifier menus.
For details on adjusting the parameters, see
“Navigating through menus” (page 35) and
“Overview of the menus” (page 36).
TUNER menu parameters
x FM MODE (FM station receiving
mode)
• FM MONO
This receiver will decode the signal as mono
signal regardless of the broadcast signal.
• FM AUTO
This receiver will decode the signal as stereo
signal when the radio station is broadcast in
stereo.
Settings for the audio
(AUDIO menu)
You can use the AUDIO menu to make
settings for the audio to suit your preference.
Select “5-AUDIO” in the amplifier menus. For
details on adjusting the parameters, see
“Navigating through menus” (page 35) and
“Overview of the menus” (page 36).
AUDIO menu parameters
x DEC. PRI. (Digital audio input
decoding priority)
Lets you specify the input mode for the digital
signal input to the DIGITAL IN and HDMI IN
jacks.
• DEC. PCM
When signals from the DIGITAL IN jack are
selected, PCM signals are given priority (to
prevent interruption when playback starts).
However, when other signals are input, there
may be no sound depending on the format.
In this case, set to “DEC. AUTO”.
When signals from the HDMI IN jack are
selected, only PCM signals are output from
the connected player. When signals in other
format are received, set to “DEC. AUTO”.
• DEC. AUTO
Automatically switches the input mode
between DTS, Dolby Digital, or PCM.
Note
When set to “DEC. AUTO” and the sound from the
digital audio jacks (for CD, etc.) is interrupted when
playback starts, set to “DEC. PCM”.
continued