Sony SDM-P234 - Manual (Page 8)

8
x Connecting to a Macintosh
When connecting a Macintosh computer, use an adapter (not supplied),
if necessary. Connect the adapter to the computer before connecting the
video signal cable.
Setup 2: Connect the audio cord
Connect the supplied audio cord to the monitor’s
corresponding audio input jack.
Using the speakers or headphones, you can listen to sound from
your computer or other audio equipment connected to the
monitor’s audio input jacks.
Setup 3: Connect the speakers or
headphones
Connect the speaker cord or headphone cord securely
to the monitor’s audio output jack. (The speakers and
headphones are not supplied.)
Setup 4: Connect the power cord
1 Connect the supplied power cord securely to the
monitor’s AC IN connector.
2 Connect the other end securely to a power outlet.
Macintosh
HD15-HD15 video signal
cable (analog RGB)
(supplied)
to the computer’s
output connector
to the HD15 input
connector
(analog RGB)
to the audio input
to audio output of the
computer or other audio
equipment
audio cord (supplied)
to the audio output
speaker cord or
headphone cord
(not supplied)
2
power cord (supplied)
to power outlet
1
to AC IN