Sony HCD-LX90AV - Manual (Page 16)

16
Tips
• Pressing TUNER/BAND while the system power
is off automatically turns on the system and tunes
in the last received station (One Touch Play).
One Touch Play is not available in Power Saving
mode.
• You can switch from another source to the radio
by pressing TUNER/BAND (Automatic Source
Selection).
• If an FM program is noisy, press STEREO/
MONO so that “MONO” appears in the display.
There will be no stereo effect, but the reception
will improve. Press this button again to restore the
stereo effect.
• To improve broadcast reception, move the
supplied antennas.
Frequency
MHz
DOLBY NR
VOLUME
ALL DISC S
PRESET
OFF
Listening to the radio (continued)
Preset number*
1
Press TUNER/BAND repeatedly
until the desired band appears in
the display.
Each time you press this button, the
band changes as follows:
FM
y AM
2
Press TUNING MODE repeatedly
until “PRESET” appears in the
display.
MANUAL t AUTO t PRESET
3
Press TUNING +/– (or PRESET +/–
on the remote) to tune in the desired
preset station.
* When only one station is preset,
“ONE PRESET” appears in the display.
To Do this
Turn off the radio Press ?/1.
Adjust the volume Turn VOLUME (or press
VOL +/– on the remote).
To listen to non-preset radio
s t a t i o n s
Press TUNING MODE repeatedly in step 2
until “MANUAL” appears, then press
TUNING +/– to tune in the desired station.
t