Sony HCD-LX90AV - Manual (Page 8)

8
Step 2: Setting up the speakers
(continued)
1
Press PRO LOGIC.
The button lights up.
2
Press T. TONE on the remote.
The test tone is heard from the speakers
in the following order. Adjust the
volume of the test tone.
t LEFT t CENTER
REAR T RIGHT T
3
From your listening position, press
CENTER LEVEL +/– and REAR
LEVEL +/– on the remote to adjust
the volume levels.
The volume levels from each speaker
should be the same.
4
Press T. TONE when you are done
adjusting.
The test tone is turned off.
Tip
If you turn VOLUME (or press VOL +/– on the
remote), all the speaker volumes change.
Note
The test tone feature works only for Dolby Pro Logic
Surround sound.
Adjusting the speaker
volume
To enjoy Dolby Pro Logic Surround sound,
adjust the volume of each speaker using the
test tone that the system provides.
3
2,4
1
VOLUME
VOL +/–
?/1
(Power)
1