Installing the battery pack – Sony CCD-TRV211 User Manual

Page 7

Advertising
background image

7

Getting started

CCD-TRV11/TRV19/TRV21/TRV29/TRV119/TRV211 3-810-780-23.E

1)

Approximate continuous recording time indoors is indicated outside of parentheses.
Approximate minutes when recording while you repeat recording start/stop,
zooming and turning the power on/off are indicated in parentheses. The actual
battery life may be shorter.

2)

Approximate minutes when using the LCD screen. When using both the viewfinder
and LCD screen, the battery life is shorter.

3)

Approximate continuous playback time indoors.

If the LCD BACK LIGHT switch is set to BRIGHT while the LCD screen is open, the
battery life is approximately 10% shorter.

To remove the battery pack

Slide the battery pack in the direction of the arrow.

Installing the battery pack

(1) Insert the top of the battery pack into the top of the battery mounting surface.
(2) Push the battery pack so that it attaches firmly.

Notes on charging the battery pack

• The POWER lamp will remain lit for a while even if the battery pack is removed and

the power cord is unplugged after charging the battery pack. This is normal.

• If the POWER lamp does not light, set the selector to VTR (DC OUT) and disconnect

the power cord. After about one minute, reconnect the power cord and set the selector
to CHARGE again.

• You cannot operate the camcorder using the AC power adaptor while charging the

battery pack.

2

1

CCD-TRV21/TRV29/TRV211

While
recording

1)

While playing back on
LCD

3)

LCD open

2)

LCD close

NP-33(supplied)

60 (30)

80 (40)

65

NP-68/66H

130 (70)

165 (95)

135

NP-60D

95 (50)

120 (70)

95

Battery pack

NP-66

100 (50)

135 (75)

105

NP-C65

105 (55)

145 (80)

100

NP-80/80D

185 (100)

240 (135)

190

NP-98/98D

210 (110)

275 (155)

220

NP-55

70 (35)

85 (50)

70

Advertising
This manual is related to the following products: