Bundling the cables, Running initial setup, Bundling the cables 6: running initial setup – Sony KDL-46EX621 User Manual
D:\Cmeng's JOB\SONY TV\SY0404_W9 (Rev-4)\4275462151_US\US03STU.fm
5: Bundling the cables
• Before bundling the cables, remove the cable
holder from the AC cover (see step 1 and 2).
Reuse the cable holder (see step 3) to bundle
the other cables (see step 4).
• Do not bundle the AC power cord together
with other cables.
* When installing on the wall, attach the cable
holder under the terminals.
6: Running initial setup
Complete your cable connections
before proceeding with the Initial
Connect the TV to your nearest
Check the ENERGY SAVING
switch setting is on (z)
Press 1 (power) on the TV. The "
(power) indicator will light green.
When you switch the TV on for the
first time, the Language menu
appears on the screen.
• When you turn on the TV for the first time, the
TV requires some internal processing for
optimization before you can perform the initial
setup. There will be no picture and sound, and
the timer indicator on the front of the TV
blinks orange for about 40 seconds. Do not turn
off the TV during this process. This process
has been completed at the factory on some