Sony KV-27FV300 - Manual (Page 20)

Connecting Your TV
13
Connecting Additional Equipment
Connecting a TV and VCR
1
Connect the coaxial cable from your TV antenna or cable service to the IN jack on your
VCR.
2
Connect a coaxial cable (not supplied) from the OUT jack on your VCR to the VHF/UHF
jack on the TV.
Optional connection
If your VCR is equipped with video outputs, you can get better picture quality by connecting
audio/video cables (not supplied) from AUDIO and VIDEO OUT on your VCR to
AUDIO/VIDEO IN on your TV.
✍
To watch video programs from your VCR, tune your TV to channel 3 or 4 (as set on the rear of your
VCR).
✍
You can use the button to switch between the VHF/UHF and VIDEO inputs.
✍
For better picture quality, use S VIDEO instead of the yellow audio/video cable. S VIDEO does not
provide sound; you still must connect the audio cables.
1 3 4
Optional connection
VCR
2
Rear of TV
1
From
cable/antenna
Video (yellow)
Audio R (red)
Audio L (white)