Connecting two vcrs for tape editing – Sony KV-27FV300 User Manual
Page 22
Connecting Your TV
15
Optional connection
If your VCR is equipped with video outputs, you can get better picture quality by connecting
audio/video cables (not supplied) from AUDIO and VIDEO OUT on your VCR to AUDIO/
VIDEO IN on your TV.
Connecting Two VCRs for Tape Editing
You can connect two VCRs together to edit video tapes. You can also connect both VCRs to
your TV to view the program being recorded.
1
Using audio/video cables (not supplied), connect AUDIO and VIDEO OUT on your first
VCR to AUDIO and VIDEO IN on your TV.
2
Using audio/video cables (not supplied), connect AUDIO and VIDEO IN on the second
VCR to the MONITOR AUDIO and VIDEO OUT on your TV.
✍
For better picture quality, use S VIDEO instead of the yellow audio/video cable. S VIDEO does not
provide sound; you still must connect the audio cables.
✍
You can use the
button to switch between the VHF/UHF and VIDEO inputs.
✍
To perform tape editing, set the TV to the video input intended for playback by pressing
.
MONITOR
AUDIO OUT
(VAR/FIX)
1
3
4
Rear of TV
2
VCR
(for playback)
VCR
(for recording)
Video (yellow)
Audio L (white)
Audio R (red)
1