Sony DR-BTN200 - Manual (Page 70)

Help Guide
Making a call while playing back music (Multi point
connection)
To call using a BLUETOOTH smartphone or mobile phone while listening to music
played on another BLUETOOTH compatible music player, the headset needs to be
connected with each device with a BLUETOOTH connection.
1. Make an A2DP BLUETOOTH connection between the headset and the
BLUETOOTH music device (music player, etc.).
2. Make an HFP or HSP BLUETOOTH connection between the headset and the
BLUETOOTH smartphone or mobile phone.
Note
If you have previously connected this BLUETOOTH device, an HFP or HSP
connection is made automatically when you turn on the headset. At the same
time, an A2DP connection may also be made automatically. If this happens,
disconnect the headset from the smartphone or mobile phone once using the
phone, then connect the devices again by repeating the process from step 1.
To call during playback
1. Operate the button during playback.
[Details] Or, operate the smartphone or
mobile phone.
If no dial tone is heard via the headset, switch the call device to the headset
using your smartphone or mobile phone. With an HFP connection, you can do
this by pressing the button on the headset for about 2 seconds.
To receive a call
When an incoming call arrives, the music playback pauses, and a ring tone is
Search
Top > Phone calls > Making a call while playing back music >
70
Search