Sony VGC-LV170J - Manual (Page 25)

25 n N
Getting Started
3 Connect other cables to the computer, if necessary.
❑ To set up TV connections available on models with the TV tuner board, see Setting Up TV Connections
(page 57) .
❑ To connect an HDMI cable to the HDMI INPUT port for using the HDMI Input function, see Using the HDMI Input
Function (page 75) .
❑ To connect your computer to an Ethernet network, see Connecting to a Network (LAN) (page 112) .
4 Snap open the cable clamp (6), route the cables through it, and then snap the cable clamp back shut.
5 Replace the stand cover and the back panel cover.
See Removing and Replacing the Covers
(page 18) for the procedure.
✍
To disconnect your computer completely from AC power, unplug the power cord when the computer is off.
Make sure that the AC outlets are easily accessible.
!
If you unplug the power cord from your computer while the computer is on or in Sleep mode, you may lose all unsaved data.