Sony VGC-LV170J - Manual (Page 77)

77 n N
Using Your VAIO Computer
Connecting and Using the HDMI-Compatible Device
You need to connect the HDMI-compatible device to your computer with an HDMI cable to display the HDMI input from the
device on the computer.
!
Be sure to use an HDMI cable approved by HDMI Licensing, LLC.
To connect your computer to the HDMI-compatible device
✍
You need to remove the back panel cover from the computer and the base stand cover from the base stand before setting up the HDMI connection. See
Removing and Replacing the Covers
(page 18) for the procedure. For information on how to connect cables to the computer, see Connecting a Power
Source and Cables (page 23) .
If you have enabled the Auto Input Sensing feature with the OSD menu, turning on the connected device automatically selects the HDMI input. For
instructions on how to enable or disable the Auto Input Sensing feature, see Changing the Display and Sound Settings for the HDMI Input
(page 79) .
1 Connect an HDMI cable (not supplied) to the HDMI output port on the device and the other end to the HDMI INPUT port
on the computer.
2 Turn on the connected device.
✍
You do not need to turn on your computer to switch the display input.
3 Press the HDMI SELECT button to switch the display input to the HDMI input.
The HDMI SELECT button and the HDMI SELECT indicator light illuminate in green.
✍
Unless you have switched the display input to the computer input since the last time you viewed the HDMI input on the computer, you do not need to
change the display input. If you want to change the display input, press the HDMI SELECT button.