Sony SVT212190X User Manual

Page 124

Advertising

1. Make sure the HDMI connection has been set up between the TV and the home theater receiver or

surround sound decoder device.

2. Change the device for sound output to the HDMI output. (See

Changing the Sound Output Device

for

more information.)

3. Turn on the TV and set its input to the HDMI input.

4. Turn on the home theater receiver or surround sound decoder device and set its input to the HDMI input.

5. Plug one end of an HDMI cable to the HDMI input port on the home theater receiver or surround sound

decoder device and the other end to the

HDMI output port on your VAIO computer.

Hint

You can adjust the screen resolution of the connected TV with your VAIO computer. See

Changing the

Resolution (Size) of the Screen Image on an HDMI-Connected Device

for more information.

With the HDMI connection, the volume can be adjusted by the connected audio device only. Your VAIO

computer has no control over the output volume of any connected devices.

About the ASSIST Button

Press the

ASSIST button to perform regular maintenance of your VAIO computer or to solve problems you

might encounter when using the computer.

While the computer is on, the

ASSIST button starts VAIO Care.

While the computer is off, the

ASSIST button displays the VAIO Care (Rescue Mode) screen.

VAIO Care (Rescue Mode): VAIO recovery solutions can be used to recover the computer in case of
emergency, for example, when Windows does not start.

Note

If the

VAIO Care (Rescue Mode) screen is displayed and five minutes pass without any operation, your

VAIO computer automatically turns off.