Sony DCR-DVD405 User Manual

Page 124

Advertising
background image

124

E

(Battery level warning)

Slow flashing

• The battery pack is nearly used up.
• Depending on the operating

environment or battery conditions, E
may flash, even if there are
approximately 20 minutes remaining.

%

(Moisture condensation warning)*

Fast flashing

• Moisture condensation has occurred

with the disc. Turn off your camcorder
and leave it for about 1 hour (p.135).

(High temperature warning)

Slow flashing

• The temperature of your camcorder is

getting higher.

Fast flashing

• The temperature of your camcorder is

extremely high.* Turn off your
camcorder and leave it for a while in a
cool place.

(Warning indicator pertaining to

“Memory Stick Duo”)

• “Memory Stick Duo” is not inserted

(p.30).

(Warning indicators pertaining to

“Memory Stick Duo”)*

• The “Memory Stick Duo” is damaged.
• The “Memory Stick Duo” is not

formatted correctly (p.77, 131).

(Warning indicator pertaining to

incompatible “Memory Stick Duo”)*

• An incompatible “Memory Stick Duo”

is inserted (p.131).

-

(Warning indicator pertaining

to the write-protect of the “Memory
Stick Duo”)*

• The write-protect tab on the “Memory

Stick Duo” is set to lock (p.131).

(Warning indicator pertaining to the

flash)*

Slow flashing

• Still charging.

Fast flashing

• There is something wrong with the flash.

(Warning indicator pertaining to

camera-shake warning)

• The amount of lights is not sufficient, so

camera-shake easily occurs. Use the
flash.

• The camcorder is unsteady, so camera-

shake easily occurs. Hold the camcorder
steady with both hands and shoot the
image. However, note that the camera-
shake warning indicator does not
disappear.

* You hear a melody when the warning indicators

appear on the screen (p.80).

If messages appear on the screen, follow the
instructions.

x

Battery

Use the “InfoLITHIUM” battery pack.
(p.133)

Battery level is low. (p.21, 133)

Old Battery. Use a new one. (p.133)

x

Drive

Z Drive error. Turn on power again.

• A problem may have occurred with the

disc drive. Turn off and then on again.

Description of warning
messages

Warning indicators and messages (continued)

Advertising