Sony STR-DA3700ES - Manual (Page 101)

101 US
Adj
u
stin
g Sett
ings
c)
480p/576p signals are output even if 480i/576i is
set.
d)
Video signals without copyright protection are
output based on the settings menu. Video signals
with copyright protection are output as 480p/576p.
Notes
• Video signals are not output from the
COMPONENT VIDEO MONITOR OUT or
MONITOR VIDEO OUT jacks when the monitor,
etc., is connected to HDMI OUT jacks.
• If you select a resolution which the connected TV
does not support in the “Resolution” menu, the
images from the TV cannot be output correctly.
• Converted HDMI image output does not support
x.v.Color, Deep Color and 3D.
This function targets content via a USB device, a home network, and Internet video.
x 480i/576i
x 480p/576p
x 720p
x 1080i
x 1080p
* If you play back content that is protected by
Macrovision, the receiver may output the image at
low resolution, or a warning message which
informs that the video signals cannot be output
may appear.
Notes
• If the warning message “Video cannot be output
from this jack.” appears, perform the following
procedure.
1
Select “BD/DVD” as the input for the main
zone.
2 Set “Playback Resolution” to “480i/576i” or
“480p/576p.”
• If no picture is output when you play back content
via a USB device, a home network, or Internet
video from the Watch/Listen menu, perform the
following procedure.
1 Select “BD/DVD” as the input for the main
zone.
2 Set “Playback Resolution” to a lower resolution.
Playback Resolution
HDMI OUT
jacks MONITOR
COMPONE
NT VIDEO
OUT jacks MONITOR
VIDEO OUT
jack ZONE 2
COMPONE
NT VIDEO
OUT OUT
jacks ZONE 2
VIDEO OUT
jack
480i/576i 480i/576i 480i/576i* 480i/576i* 480i/576i* 480i/576i*
480p/576p 480p/576p 480p/576p* 480i/576i* 480p/576p* 480i/576i*
720p (factory default setting) 720p 720p* – 720p* –
1080i 1080i 1080i* – 1080i* –
1080p 1080p 1080i* – 1080i* –
“Playback
Resolution”
menu setting
Output
video
resolution