Sony STR-DA3700ES - Manual (Page 81)

81 US
U
s
ing O
th
e
r
Fe
ature
s
3
Select “Pass Through,” then
press .
4
Select the parameter you want,
then press
.
Switching between
digital and analog audio
When you connect equipment to both digital
and analog audio input jacks on the receiver,
you can fix the audio input mode to either of
them, or switch from one to the other,
depending on the type of material you intend
to watch.
1
Select the input source using
the input buttons.
2
Press INPUT MODE.
The selected audio input mode appears in
the display window.
• AUTO
Gives priority to digital audio signals
when there are both digital and analog
connections.
If there are no digital audio signals,
analog audio signals are selected.
When TV input is selected, priority is
given to the Audio Return Channel
(ARC) signals. If your TV is not
compatible with the Audio Return
Channel (ARC), the digital optical
audio signals are selected.
If the Control for HDMI functions of
both the receiver and the TV are not
activated, the Audio Return Channel
(ARC) does not work.
Parameter Explanation
On When the receiver is in the
standby mode, the receiver
outputs HDMI signals from
the receiver’s HDMI OUT
jack.
Off The receiver does not output
HDMI signals when in the
standby mode. Turn on the
receiver to enjoy the
connected equipment’s
source on the TV. This
setting saves power in the
standby mode, compared
with the “On” setting.
Input
buttons
INPUT
MODE
continued