Sony DCR-VX2000 User Manual
Page 166
166
Identifying the parts and controls
ys
Carrying handle
yd
Remote sensor
yf
Camera recording lamp (p. 15)
yg
CUSTOM PRESET button (p. 53)
yh
Viewfinder adjustment lever (p. 19)
yj
Hook for removing the viewfinder
(p. 157)
yk
EJECT switch (p. 14)
yl
DC IN jack (p. 10)
u;
Tripod receptacle
Make sure that the length of the tripod
screw is less than 6.5 mm (9/32 inch).
Otherwise, you cannot attach the tripod
securely and the screw may damage
your camcorder.
ua
Intelligent accessory shoe
us
MIC/LINE switch (p. 93)
ud
MIC jack (PLUG IN POWER) (p. 93)
Connect an external microphone (not
supplied). This jack also accepts a “plug-
in-power” microphone.
When using a “plug-in-power”
microphone, set the MIC/LINE swithc
to MIC, when using a non-“plug-in-
power” microphone or audio
equipment, set the MIC/LINE switch to
LINE.
uf
Microphone (p. 94)
ug
S VIDEO ID-2 jack (p. 30, 33, 73, 87, 128)
uh
VIDEO ID-2 jack (p. 30, 33, 73, 87, 128)
uj
AUDIO L/R jack (p. 30, 73, 87, 94)
uk
DV IN/OUT jack (p. 74, 89, 129)
This “i.LINK” mark is a trademark of
Sony Corporation and indicates that this
product is in agreement with IEEE 1394-
1995 specifications and their revisions.
The DV IN/OUT jack is i.LINK
compatible.
ul
LANC jack
LANC stands for Local Application
Control Bus System. The LANC
control jack is used for controlling the
tape transport of video equipment and
peripherals connected to it. This jack has
the same function as the jack indicated
as CONTROL L or REMOTE.
i; i (headphones) jack
When you use headphones, the speaker
on your camcorder is silent.
ys
yd
yf
yg
yh
yj
yk
yl
u;
ua
us
ud
uf
ug
uh
uj
ul
uk
i;