Sony DCR-VX2000 - Manual (Page 84)

84
Dubbing only desired scenes – Digital program editing
(6) Press the SEL/PUSH EXEC dial, or MARK on the Remote Commander.
The CUT-IN point of the first program is set, and the top part of the program mark
changes to light blue.
(7) Search for the end of the first scene you want to insert using the video operating
buttons, then pause playback (p. 29).
(8) Press the SEL/PUSH EXEC dial, or MARK on the Remote Commander.
The CUT-OUT point of the first program is set, then the bottom part of the program
mark changes to light blue.
(9) Repeat steps 5 to 8, then set the program.
When the program is set, the program mark changes to light blue.
You can set a maximum of 20 programs.
On a blank portion of the tape
You cannot set CUT-IN or CUT-OUT on a blank portion of the tape.
Note
The total time of the programs is indicated on the LCD screen or in the viewfinder, however,
if the time code on the tape is not continuous, the time may not be indicated properly.
Erasing the last program
To change the end of the last program, delete the CUT-OUT mark.
To erase the whole program, delete both the CUT-IN and CUT-OUT marks.
(1) Turn the SEL/PUSH EXEC dial to select UNDO, then press the dial. The last set
program mark flashes.
(2) Turn the SEL/PUSH EXEC dial to select EXECUTE, then press the dial and the
setting is canceled.
To cancel erasing
Select RETURN in step 2, then press the SEL/PUSH EXEC dial.
Erasing all programs
(1) Select VIDEO EDIT in the menu settings. Turn the SEL/PUSH EXEC dial to select
ERASE ALL, then press the dial. All the program marks flash.
(2) Turn the SEL/PUSH EXEC dial to select EXECUTE, then press the dial and the
settings are canceled.
7 6
STOP PLAY REW FF PAUSE
MARK
UNDO
ERASE AL L
START
0:08:55:06
1 OUT
TOTAL
SCENE 0:00:00:00
0
V I DEO ED I T
[MENU] : END
8,9
MARK
UNDO
ERASE AL L
START
0:09:07:06
2 I N
TOTAL
SCENE 0:00:12:13
1
V I DEO ED I T
MARK
UNDO
ERASE AL L
START
0:10:01:23
4 I N
TOTAL
SCENE 0:00:47:12
3
V I DEO ED I T
[MENU] : END [MENU] : END