Sony SLV-M11HF - Manual (Page 21)

21
Additional Operations
Mark on the TV screen
Slow motion Pause Slow motion
in reverse
Playback mode Normal speed Double speed High speed
High speed Double speed Normal speed
in reverse in reverse in reverse
X 2
X 2 – X 1 –
Playback options Operation
Play frame by frame
Rewind and start play
To resume normal playback
Press H PLAY.
Using the shuttle ring
With the shuttle ring, you can operate a variety of playback options. There
are two ways for using the shuttle ring, normal mode and jog mode.
To use the shuttle ring in normal mode
During playback or pause, turn the shuttle ring clockwise or
counterclockwise. Each change in the shuttle ring position changes the
playback mode, and the corresponding mark appears on the TV screen for a
few seconds in the following way if the on-screen display function is on:
During pause, press M FF or m REW on the remote
commander. Hold down the button to play one frame each
second.
During stop, press H PLAY on the VCR while holding down
m
␣REW on the VCR.
continued