Sony DSC-T1 - Manual (Page 55)

55
Adv
a
nced
st
ill
i
m
age
sh
oot
in
g
Adjusting the flash
level
— Flash Level
Mode switch:
You can adjust the amount of flash light.
Before operation
Set (Camera) in the menu to other than
[Auto], (Twilight mode) or
(Fireworks mode) (pages 43 and 102).
a Set the mode switch to .
b Press MENU.
The menu appears.
c Select (Flash Level) with b /
B , then select the desired
setting with v / V .
High: Makes the flash level higher
than normal.
Normal: Normal setting.
Low: Makes the flash level lower than
normal.
• You may not be able to shoot with the set flash
level depending on the shooting conditions.
Shooting images
continuously
— Burst
Mode switch:
This mode is used for continuous shooting.
Each time you press and hold the shutter
button in this mode, the camera records
maximum four images in succession.
Speed priority burst ( )
The images are shot with a short interval
(approx. 0.33 second). During shooting in
this mode, the images are not displayed on
the LCD screen. Compose the image before
pressing the shutter button.
Framing priority burst ( )
Shooting is performed while displaying the
images on the LCD screen. The shooting
interval (approx. 0.36 second) becomes
longer than speed priority burst.
• When a “Memory Stick Duo” becomes full,
shooting stops even if you continue to hold
down the shutter button.
Mode switch
Control button
MENU
S
F