Sony HDR-CX130 - Manual (Page 56)


Table of C
on
ten
ts
Enjo
y U
seful F
unc
tions
Inde
x
US
4
Connect the USB Adaptor Cable
to the  (USB) jack of your
camcorder.
Make sure not to disconnect the USB
cable while [Preparing image database
file. Please wait.] is displayed on the
LCD screen. If [Repair Img. DB F.] is
displayed on the camcorder screen,
touch .
You cannot use the Built-in USB Cable for
this type of connection.
5
Connect the external media
device and touch [Copy.] on the
camcorder screen.
HDR-CX130:
Movies and photos that are stored
in the memory card (inserted in the
camcorder), and that have not yet been
saved on to external media device
can be saved on the connected media
device at this time.

HDR-CX160/CX180:
Movies and photos that are stored on
one of the camcorder’s recording media
selected in [Media Select], and that
have not yet been saved on external
media device can be saved on the
connected media device at this time.
This operation is available only when there
are newly recorded images.
6
After operation is completed,
touch
on the camcorder
screen.
When connecting an external media
device
The images saved in the external media
device are displayed on the LCD screen.
Images saved on the connected external
media device appear on the LCD screen.
When an external media device is
connected, the USB icon will appear on the
Event View screen, etc.
You can make menu settings of the external
media device such as deleting images.
Touch (MENU)  [Edit/Copy] on
Event View.

USB Adaptor
Cable
VMC-UAM1
(sold separately)