Sony HDR-CX130 - Manual (Page 83)


Table of C
on
ten
ts
Enjo
y U
seful F
unc
tions
Inde
x
US
Demo Mode
When the camcorder is connected to a wall
outlet (wall socket) and no operation is
performed for about 10 minutes with the
movie recording mode or the Event View
mode set, a demonstration movie starts
playing.
 On
The demonstration appears.
Off
The demonstration does not appear.
Notes
In the default setting, the demonstration
movie is in the Event Index. If you delete the
demonstration movie, you cannot recover it
(HDR-CX160/CX180).
A movie you have recorded will be registered as
the demonstration movie if it satisfies all of the
following conditions (HDR-CX160/CX180).
The movie is protected
The movie is the first one displayed on the
Event Index screen
The movie is saved on the internal recording
media
The movie is recorded with high definition
image quality (HD)
Tips
When you set this item to [On] and touch
, the demonstration starts playing.
If you make one of the following operations, the
demonstration will be suspended. (It appears
again if no operation is performed for about 10
minutes.)
Pressing START/STOP or PHOTO
Touching the screen during the
demonstration
Turning on the (Photo) lamp
Pressing (View Images)
Pressing MODE















Date & Time Setting
 Date & Time
See page 17.
 Daylight Savings/Summer Time
You can change this setting without
stopping the clock. Set to [On] to move the
time forward 1 hour.
 Off
Does not set the summertime.
On
Sets the summertime.
 Date & Time Format
You can select one from 4 types of date and
time format.
Area Setting
You can adjust a time difference without
stopping the clock. Select your local area
when using the camcorder in other time
zones. Refer to the world time difference
information on page 95.
 Home
Select this item when you are going to use
the camcorder in the area where you are
living.
Destination ( )
Select this item when you want to use
the camcorder with the area setting set to
another place.
Tips
If you visit a certain place often and want to
use the camcorder with the area setting set to
that place, it is useful if you set the place to
[Destination].

