Sony HDR-CX130 - Manual (Page 29)


Table of C
on
ten
ts
Enjo
y U
seful F
unc
tions
Inde
x
US
Operating the camcorder while playing a movie
You can use the functions shown in the figure below while the camcorder is playing a movie.
The figure below will be displayed when you select [ MOVIE/PHOTO] (the default
setting) or [ MOVIE] by touching the Switch Image Type button on the Event Index
screen.
* These buttons can be used only when the camcorder is playing a movie.
Notes
You may not be able to play back the images with other devices than camcorder.
Tips
Touching the button on the playback screen displays functions you can currently use, and allows you
to use those functions easily.
When playback from the selected image reaches the last image, the screen returns to the INDEX screen.
Touch / during pause to play back movies slowly.
As you repeat touching / during playback, movies are played as fast as about 5 times 
about 10 times  about 30 times  about 60 times.
The recording date, time, and shooting conditions are recorded automatically during recording. This
information is not displayed during recording, but you can display it during playback by touching
(MENU)  [Setup]  [ (Playback Settings)]  [Data Code]  a desired setting  
.
In the default setting, a protected demonstration movie is pre-recorded (HDR-CX160/CX180).
To adjust the sound volume of movies
While playing back movies, touch  adjust with /  .









To pause*/play
To fast-forward*
Delete
Next
To fast-reverse*
To stop*
Previous
Volume adjustment
Context