Sony KDE-37XS955 - Manual (Page 21)

19
Setup
4 VIDEO 6 IN
HDMI IN/R-AUDIO-L
HDMI (High-Definition Multimedia Interface) provides an uncompressed, all-digital
audio/video interface between this TV and any HDMI-equipped audio/video component,
such as a set-top box, DVD player, and A/V receiver. HDMI supports enhanced, or high-
definition video, plus two-channel digital audio.
5 VIDEO 1/3 IN
VIDEO/
R-AUDIO-L (MONO)
Connect to the composite A/V output jacks on your VCR or other video component. A third
composite A/V input jack (VIDEO 2) is located on the left side panel of the TV.
6 HD/DVD 4/5 IN
(1080i/720p/480p/
480i)
Connect to your DVD player’s or digital set-top box’s component video (Y, P B , P R ) and
audio (L/R) jacks. Component video provides better picture quality than the S VIDEO ( 9 )
or the composite video ( 5 ) connections.
7 CABLE RF input that connects to your cable signal.
8 VHF/UHF RF input that connects to your VHF/UHF antenna or cable box.
9 VIDEO 1/3 IN
S VIDEO
Connects to the S VIDEO OUT jack of your VCR or other video equipment that has
S VIDEO. S VIDEO provides better picture quality than the composite video (
5 ).
0 CENTER SPEAKER
IN 180W (6
Ω) MAX
Connect the center output terminals of Dolby Pro Logic* system decoder amplifier. You can
use the TV speakers as a center speaker.
qa CONTROL S
IN/OUT
Allows the TV to receive (IN) and send (OUT) remote control signals to other Sony
infrared-controlled audio or video equipment that has the CONTROL S function.
qs SUBWOOFER OUT
(VAR)
Connects to the input jack of your woofer.
qd AUDIO OUT
(VAR/FIX/R/L)
Connects to the left and right audio input jacks of your audio or video equipment. You can
use these outputs to listen to your TV’s audio through your stereo system.
* “Dolby”, “Pro Logic”, and the double-D symbol are trademarks of Dolby Laboratories.
Jack Description