Sony KDE-37XS955 - Manual (Page 66)

64
Features
Watching TV
z For a complete list of all
the functions of the
remote control, see page
56. To Do This ... Do This ...
Activate the remote control to
operate the TV Press TV (FUNCTION) .
Turn on/off the TV Press POWER .
Tune directly to a channel To tune to analog channels, press 0-9 and then
ENT (or wait 3 seconds).
For digital subchannels, press 0-9 , , press
0-9 again, and then ENT .
For example, to select subchannel 2.1, press 2 ,
, 1 , and then press ENT .
You can also select channels using
the program guide. See page 65 for
details.
Adjust the volume Press VOL +/– .
Mute the volume Press MUTING (press again or VOL + to
unmute).
Alternate back and forth between
two channels Press JUMP .
The TV alternates between the current channel
and the last channel tuned.
Display the current channel
number (and other information) Press DISPLAY once to display the channel
number, current time, wide mode, and channel
label (if set). Press
DISPLAY again to turn
Display off.
Switch the TV’s input to the VCR,
DVD player, or other connected
equipment Press TV/VIDEO repeatedly to cycle through
the video equipment connected to the TV’s
video inputs.
Change video and audio options,
customize the TV’s setup, set
parental controls, and more Press MENU to display the Menu. For details,
see “Using the Menus” on page 91.
Switch the TV’s input between
sources connected to the TV’s
VHF/UHF and CABLE inputs Press ANT to alternate between sources
connected to the TV’s VHF/UHF and CABLE
inputs.