When the volume of analog devices is too low, Details, Help guide – Sony MDR-HW700DS User Manual
Page 45: Search
Advertising
MDR-HW700DS
>
Connecting digital devices without HDMI jacks
>
When the volume of analog devices is too low
Change the ATT (LINE IN) switch on the left side of the processor to “0dB.”
Switch position
Devices connected
0dB
Devices with low output level, such as portable devices
–8dB (default setting) Other devices
Notes
Make sure that you turn down the volume before using the ATT (LINE IN) switch.
When the sound of analog devices is distorted (with noise, etc.), change the ATT (LINE
IN) switch to “–8dB.”
When you connect a device to the TV (OPT) jacks (optical digital audio input/output
© 2014 Sony Corporation
41
Search
Advertising