Sony MDR-HW700DS User Manual
Page 51
Displaying the current status of the system (Status screen)
If the format is not the correct one, check the settings on the devices connected.
SACD and DVD audio are not compatible with the processor via the HDMI connection.
4.
Put on the headphones, and adjust the volume.
The headphones are turned on when you put them on or press the
/
(power)
button on the headphones for about 1 second.
Tips
When you put on the headphones when the processor is in standby mode, the processor
is turned on automatically.
When the transmission is unstable (intermittent sound, etc.), slide the WIRELESS BAND
switch on the processor and find an appropriate channel.
You can check the status of the system on the Status screen.
When the processor and the headphones are turned on, you can select the input by
using the INPUT button
on the headphones.
Notes
Use the headphones within the signal transmission range.
When you listen to the sound of movies, if you turn up the volume too much at quiet
scenes, the sound of the noisy scenes, such as explosions, will be so loud that it may
damage your ears. Pay attention to the volume level.
Using HDMI devices efficiently
© 2014 Sony Corporation
47