Sony DEV-50V - Manual (Page 20)

0
Table of C
on
ten
ts
M
enu Lists
Inde
x
GB
Move the power zoom lever slightly for a
slower zoom. Move it further for a faster
zoom.
Notes
Be sure to keep your finger on the power zoom
lever. If you move your finger off the power
zoom lever, the operation sound of the power
zoom lever may also be recorded.
To adjust the focus manually
 Select (MENU)  [Camera/Mic] 
[ Manual Settings]  [Focus] using the
multi-selector.
 Select [Manual], then select
(nearby subject) / (distant subject)
several times to adjust the focus.
Tips
To adjust the focus automatically, select [Auto].




To switch the viewfinder display
between 2D and 3D
Press FINDER 2D/3D to switch the
viewfinder display between 2D and 3D.
At the default setting, images in the
viewfinder are displayed in 3D.
Notes
The recorded image does not change even if you
press FINDER 2D/3D.
Tips
In the 3D display mode for the viewfinder, this
product displays the image from the left lens in
the left viewfinder, and the image from the right
lens in the right viewfinder. In the 2D display
mode, this product displays the image from the
left lens in both the left and right viewfinder.
To use this product in dark places
(Hyper Gain)
You can view a subject brightly even in dark
places by increasing the gain.
Select (MENU)  [Camera/Mic] 
[ Manual Settings]  [Hyper Gain] 
[On].
Notes
The image quality deteriorates due to noise
when using [Hyper Gain]. In addition, the color
of the image becomes light.
Tips
It is recommended that you adjust the focus
manually.








Wider range of view
(Wide angle)
Close view
(Telephoto)