Sony KDL-19M4000 - Manual (Page 37)

Other Information
37
O
th
e
r Info
rm
a
tio
n
Preparation for Wall Mounting
This TV can be installed on a wall by using a wall-mount bracket (sold
separately). Before mounting the TV on a wall, the handle and stand must be
removed from the TV.
Follow the simple steps below to remove the handle and stand:
1 Disconnect all the cables from the TV.
2 Cover a level and stable surface with a thick and soft cloth.
3 Gently lay the TV face down onto the cloth.
4 Remove the screws and detach the handle [see illustration A].
5 Remove the screws and detach the stand from the TV [see illustration
B]. Be sure to hold the stand firmly while removing the last screw.
6 Do not remove any other screws from the TV.
For bracket installation, refer to the instruction guide provided by the Wall-
Mount Bracket model for your TV. Sufficient expertise is required in
installing this TV, especially to determine the strength of the wall for
withstanding the TV’s weight. For product protection and safety reasons,
Sony strongly recommends that you use the Wall-Mount Bracket model
designed for your TV and the wall-mounting of your TV should be
performed by Sony dealers or licensed contractors.
Do not remove the stand for any reason other than to wall-mount the TV.
Sony Wall-Mount
Bracket Model
SU-WL100
Handle
Soft cloth
Stand
Be sure to store the removed screws, handle and stand in a safe place
until you are ready to reattach the handle and stand. Keep the screws
away from small children.