Connecting a port replicator, To attach your notebook to the port replicator – Sony PCG-GR250 User Manual
Page 55
Connecting a Port Replicator
55
Connecting a Port Replicator
Your notebook supports the use of the Sony PCGA-PRG1 port replicator
(optional). Attaching the port replicator enables you to connect additional
peripherals to your notebook.
To attach your notebook to the port replicator
To supply power to your notebook while it is connected to the port replicator,
connect the AC adapter directly to the port replicator.
Port replicator
1
DC In port
6
Network port
(Ethernet 10Base-T/100Base-
TX)
2
USB ports
7
VGA port
3
/
Mouse/Keyboard (PS/2) port 8
S-Video out jack
4
Serial port
9
Video out jack
5
Printer port
10
Line-In jack
✍
The port replicator can be powered only with an AC adapter. Do not remove the AC
adapter from the port replicator or the AC outlet when using the port replicator; this
may cause data damage or hardware malfunctions.
✍
When attaching your notebook to the port replicator, do not attempt to insert or
remove the battery pack. Lifting and turning the notebook with an attached port
replicator could cause a temporary loss of power.
When connecting the video cables to S Video and Video Out simultaneously, only the S
Video port can be used.